1-7
2.
Audio Input / Output
The IP device supports audio input and output, with terminal
block.
3.
Reset Button
Step 1:
Switch off IP device by disconnecting the power cable
Step 2:
Press and continue to hold the Reset Button. Reconnect the
power cable while continuing to hold the reset button.
Step 3:
Keep holding the reset button depressed for a while,
release the reset button. The unit will start up with factory default
settings.
4.
Ethernet Port
The IP device connects to the Ethernet via a standard RJ45
connector. Supporting NWAY, this IP device can auto detect the
speed of local network segment (10Base-T/100Base-TX
Ethernet).
5.
Power LED Indicator
The LED indicator lights up one time upon power up. It will
lights up again when this IP device is fully booted up.
