1.2 PHYSICAL DESCRIPTION
Read the following information to familiarize yourself with the video Decoder, and make
particular notes of where the connectors and LEDs are located
.
1.
Action LED Indicator
The LED will light up after IP device has successfully completed the boot
process.
2.
Serial Port LED Indicator
LEDs indicating when serial port is active.
3.
Reset Button
Step 1:
Switch off IP device by disconnecting the power cable
power cable.
Step 2:
Using a suitable pointed object, press and continue to hold the
Reset Button depressed. While continuing to hold the reset button
depressed, reconnect the
Step 3:
Keep holding the reset button depressed around 6 seconds, release
the reset button. The unit will start up with factory default settings.
4.
Terminal Blocks Pin 1~6
The IP device supports two alarm input and two alarm output. DI: Logic
Level 0: 0~0.4V; Logic Level 1: 3.3~30V DO: Logic Level 0:
0.1~0.6V; Logic Level1: 2.4~5V
Please find Support package” TS-00045” for details.
PIN NAME DESCRIPTION
1
DO1
Digital Output 1
2
DO2
Digital Output 2
1-2
