Loading options for V6-compatible application modules
4
FST-2000 TestPad Service Pack/Upgrade/Optioning Instructions
June 2004
Loading options for V6-compatible application modules
You can purchase a variety of options for your UIM and application
module that expand your testing abilities and enhance your work
processes. Options are shipped on PCMCIA cards. If a software
upgrade is required for the options, the upgrade is also shipped on the
cards. You can load options onto your unit from a single card or from
two separate cards simultaneously.
To load options on a V6-compatible application module
1
Insert the PCMCIA card or cards with the options in a PCMCIA
card slot.
2
Turn the TestPad ON.
If the options you purchased require a software upgrade, you will
be prompted to upgrade the unit before loading the options. See
“Loading application module software upgrades” on
3
Select the
Tools
button, and then do one of the following:
– To load UIM options, select
TestPad Settings
, and then select
the
Revisions/Options
tab.
– To load application module options, select
FST-XXXX
Settings
, where XXXX represents the module number (for
example, FST-2310). The Revisions/Options tab appears.
Options currently installed on the TestPad appear under TestPad
Options or FST-XXXX Options.
4
Select
Install Options
.
The Options Installation dialog box appears, listing the options
available on the PCMCIA card (or cards).
The Number Remaining field indicates the remaining copies of the
option which are available for installation. Each time you install an
option, the TestPad decreases the number remaining by one.
Select the option or options you want to install.
NOTE:
If you inserted two PCMCIA optioning cards into the TestPad, and
both cards include the same option, the option appears twice in the
list of options.