Actel ProASIC3/E Скачать руководство пользователя страница 62 | Manualshive

Страница: 62 / 106

Actel ProASIC3/E Скачать руководство пользователя страница 62

Quick Start Tutorial

62

ProASIC3/E Starter Kit User’s Guide and Tutorial

Selecting an Action

After loading the STAPL file, select an action from the Action list. See

for a definition of each action.

Programming the Device

To program the device:

1.

In the Action list, select

PROGRAM

.

Table 7-1 · Action Options

Option

Action

QUERY_SECURITY

Checks the security status of the device. If the device is programmed with
the security key, then this command returns with Read inhibit:1, Write
inhibit:1. If the security key is not present, the values are Read inhibit:0,
Write inhibit:0.

ERASE

Erases the device.

READ_IDCODE

Reads the device ID code.

VERIFY

Verifies if the device is programmed with the loaded STAPL file. Can be
used to ensure that the bitstream programmed in the device is the same as
the original STAPL file. If the wrong STAPL file is loaded, Exit 11
appears in the log window. A successful operation results in Exit 0.

PROGRAM

Programs the device.

DEVICE_INFO

Displays the serial number of the device, the Design Name that is
programmed into the device, and the checksum that is programmed into
the device.

ERASE_FROM

Erases FlashROM only.

PROGRAM_FROM

Programs FlashROM only.

VERIFY_FROM

Verifies FlashROM only.

PROGRAM_ARRAY

Programs the FPGA Array only.

ERASE_ARRAY

Erases the FPGA Array only.

VERIFY_ARRAY

Verifies the FPGA Array only.

PROGRAM

Programs FPGA Array, FlashROM and/or security settings of the device.

ERASE_ALL

Erases FPGA Array, FlashROM and/or security settings of the device.

ACTION_VERIFY

Verifies FPGA Array, FlashROM and/or security settings of the device.

READ_IDCODE

Reads the device ID code.

ENC_DATA_AUTHENTICATION

Authenticates the encrypted data against the security settings you
previously programmed into the device. This is a preventative measure that
stops the program from corrupting data into the device.

PROGRAM_SECURITY

Programs security settings into the device.

DEVICE_INFO

Displays the Device IDCODE, security settings, design name, checksum,
and FlashROM content that is programmed into the device.

«
...
60
61
62
63
64
...
»

Содержание ProASIC3/E











































































































Отзывы:

Нет отзывов