Actel ProASIC 3, Быстрый старт

Страница: 2 / 2

50200268-0/6.10
ProASIC3 Starter Kit Quickstart Card
Running the Test Design
To test the board, you can program the demo design. Download it from the ProASIC3 Starter Kit
page:
www.actel.com/products/hardware/devkits_boards/proasic3_starter.aspx .
Software and Licensing
Visit the Actel website ( www.actel.com ) for the latest Libero IDE Software. Request a free gold
license to activate your software.
Software releases: www.actel.com/download/software/libero
Licensing: http://www.actel.com/Portal/DPortal.aspx?v=24
Documentation Resources
For further kit information, including user's guide, tutorial, and full design examples, refer to the
ProASIC3 Starter Kit page:
www.actel.com/products/hardware/devkits_boards/proasic3_starter.aspx .
Technical Support and Contacts
Technical support is available online at www.actel.com/support , by email at tech@actel.com, or by
phone:
Phone (NA): 800.262.1060
Phone (Int'l): +1 650.318.4460
Actel Sales offices, including Representatives and Distributors, are located worldwide. To find your
local representative go to:
www.actel.com/company/contact .
Action Results
Press SW1 Asynchronous clear for the whole design
Press SW2 Up-down control for the 8-bit counter. Press and hold SW2 for down count.
Press SW3
Synchronous load for the 8-bit counter. Press SW3 for loading from the Hex
switches.
Press SW4 Switching between manual clock(SW5) and 40 MHz oscillator clock.
Press SW5 Manual clock (very useful for simulation)
Press SW6
Select for DATA_BLOCK. It allows switching LED output between the
counter and flashing data.
Change Hex Switch
setting (U13 and U14)
Changes the loaded data for the 8-bit counter.