4. Click the receiver's connect button once (located on the back of the receiver) within 5 seconds
after clicking the connect button on the mouse. The LED will start blinking, when the connection is
established.
5. Move the mouse around to test if it was successful.
6. If the synchronization is not successful for some reason please
a. Remove the batteries and unplug the receivers
b. Wait for 20 sec then to try the step 1 to 4 again.
Note: During normal use, please make sure that the mouse is no more than 3 ft away from the
receiver in order to have reliable connection.
The LED on the receiver will light up or blink while the mouse is being used.
Operation Guide
Mouse Mode
In mouse mode, the 1st, 2nd and scrolling buttons are defined as regular mouse. The side buttons
are defined as browser (IE), application switch (the same as “Alt+Tab”) and “ESC”.
Presenter Mode
The presenter mode can be swapped by one click. In presenter mode, the mode indicator will light
in blue. At this mode, the button definition has some different. The different shows in the following
table:
Note. The LASER beam is standard 650 nm product. It's designed for presentation only.
DO NOT
use it to point at someone or someone's eye. It will cause serious hurt.
GENERAL SPECIFICATION
S
6+1 Wireless presenter optical mouse.
Build-in 650nm LASER head.
800dpi hardware resolution.
Low power indicator.
Rechargeable.
Power on/ off switch.
Charger with build-in receiver.
Mouse/ Presenter Mode switch.
40/46MHz Digital Radio Frequency.
3 special design side buttons.
Ergonomic and enlarge buttons design for comfortable grip.
2 AAA batteries to operate the mouse.
Please DO NOT direct the laser beam at anyone's eye.
Button
Function in Mouse Mode
Function in Presenter
Mode
Right
Right Button
Next Page
Center
Center Button
Laser Beam
Scroll
Scroll
-
Mode
Switch to Presenter Mode
Switch to Mouse Mode
One
Execute Internet Explorer
Execute Internet Explorer
Two
Alt + Tab
Alt + Tab
Three
ESC
ESC
8
