www.acti.com
Hardware Manual
12
Installation Procedures
Prepare for Installation
The following figures are for reference only. See the actual product for details.
Before mounting the camera, check the device model, accessory types and quantities against
the packing list to ensure the components are complete.
Verify the bearing capacity of the mounted position
Verify that the mounted position meets the bearing requirements. Otherwise, you are advised
to reinforce the mounted position for the device weight. For more information, see the product
datasheet.
Verify the lightning protection and grounding requirements
Select proper lightning protection devices for the power supply, audio and video signals
interfaces, and RS485 interfaces.
Cable Requirements
10M/100M Ethernet CAT 5/5E UTP cables are applicable to the ANSI/EIA/TIA-568A/B and
ISO/D.
Eight wires in the network cable need to be inserted in parallel into the top of the cable
connector. The cable connector needs to be crimped in position. When the cable connector is
in position, ensure that the metal pieces of the cable connector are parallel to each other and
the clamp of the cable connector is intact.
Tail
cable
Bracket
adpater
Safety
wire
Dome