IMPORTANT!
GOLD-PLUS is a precision battery capacity tester.
To test the Ampere-hour (Ah) capacity of a lead
acid battery precisely, the battery voltage must
be below 6.50 volts for a 6V battery and 13.00
volts for a 12V battery.
If the battery voltage is higher, load the battery
for a few seconds to remove any excess charge
voltage. Failure to do this will result in low Ah
readings being obtained.
ACT Meters Ltd
The Old Smithy
Church Road
Rainford
Merseyside
WA11 8HD
United Kingdom
Phone: +44(0)1744 886660
Fax: +44(0)1744 886661
USA Freecall: 1-877-712-2278
Email: [email protected]
Web: www.actmeters.com
Wrong
Right
Right
Right
QUICk TEST
UIDE
1: Connect tightly to battery p
wn.
2: Follow 20 second test proc
e.
3: Copy results onto a lab
ttach to the battery.
Note: The Ah available is det
y battery age,
temperature and state of char
ead STEP 5).
Grip clips tightly around tab terminals
Grip tightly around posts with clip spikes
P
tly inside battery terminals
D
onnect clips to high resistance bolts
POWERING UP…
SET CALIBRATE
TESTING VOLTS…
PLEASE WAIT…
12.66 VOLTS
PRESS TO TEST
TESTING
Ah
…
7.2
Ah
TEST COMPLETE
GOLD-PLUS 6/12V Intelligent Batt
Operating Instructions
ush clips tightly inside battery terminals
o not connect clips to high resistance bolts
el and attach to the battery.
ermined by battery age.
ge (read STEP 5).
edure.
osts as shown.
t
igh
R
Wrong
Right
GUIDE
ery Tester
