ACTpro 1520 PSU Operating and Installation Manual
LED indicators:
Green -
AC OK
Indicates that the AC Mains is within specification.
Amber
–
Powered By Battery
Indicates that the battery is supplying the output voltage.
Red -
Fuse Fault
Indicates electronic output shutdown fuse is active and
that no power is being supplied to the load.
The maximum current that the PSU can guarantee is 2A.
Beyond this the fuse will trip and the LED will stay on until
the load is fully disconnected.
Once the load has been disconnected, remove devices to
reduce the current demand below 2A.
It is important for the installer to calculate the power
budget adequately. Please refer to the section titled
„Power Budget‟ for more information.
Installation Instructions:
The ACTpro 1520 is for indoor installation only and must be installed as permanently
connected equipment.
This equipment must be earthed and an RCD/Earth Fault device must be fitted.
An external disconnect device must be fitted. Before installation ensure that the mains
supply to the ACTpro 1520 is disconnected.
Mains power should be connected to the ACTpro 1520 by a licensed electrician in
accordance with local/national codes.
Mounting.
Mount the ACTpro 1520 directly on to the wall with the supplied screws.
The keyed mounting hole should be screwed first to the wall to aid the mounting. The unit
should be installed in a ventilated area that allows for accessibility after installation.
