background image

 

  
 

ACT20 Pin Entry Keypad

 

 

The ACT20 is a rugged metal-housed pinpad for use with a separate controller.  It is 
usually used in conjunction with an ACT1010 magnetic swipe card reader for pin and 
swipe operation.  Physically similar to the ACT10, the function of this device is quite 
different. The ACT20 is a slave device which transmits each keypress directly to the 
system controller. The unit is connected to the controller via an 8 core screened cable. 
The same cable may be used to carry the signals from a swipe reader as the ACT20 
connects in parallel (refer to diagram). 

 

Pin Pad Cable Connections 

 

Core 

Colour 

Description 

White 

Media Sense (open collector) 

Green 

Clock (open collector) 

Blue 

Data (open collector) 

Red 

5V  Power (for reader only) 

Black 

0V Ground 

Brown 

Red LED control (negative applied) 

Yellow 

Green LED control (negative applied) 

Orange 

12V Power (for ACT20 only) 

Shield 

Bonded to Reader housing 

 

ACT20 Specification

 

 

Voltage 

12VDC nominal  (10.5-16V) 

Current 

20mA standby, 75mA maximum 

Output Sink Current 

50mA maximum 

Operating Temperature 

-10

 o

C to +55 

o

Cable 

8-core screened (shared with reader) 

Reader Distance 

Max 30m from controller 

 

Operation with ACT1000 Controller

 

 

PIN entry on the ACT1000/2000 or Ds100 is selected by setting the 

PIN Required

 

option in the Installer menu/Door settings/Timed actions menu for the doors in 
question. A valid PIN must also be entered for the required group or user.  
 
The unit acts as a slave to the ACT1000/2000 controller and is connected in parallel 
with the reader (swipe or proximity). Normally the unit is dormant with only the 
standby LED illuminated. When a pin only entry is required the X button must be 
pressed before the pin code is entered, the keypad backlight and all LEDs illuminate. 
When a pin code is required with a swipe card the pin code is entered after the card is 
swiped. The ACT1000/2000 will process the entered PIN/Card and illuminate the red 
or green LED to indicate access granted or denied. 

Note that the ACT20 may only be used with 

clock and data

 readers.

 

Отзывы: