AI7697HD
MT7697D IoT SiP Module
A
2017.10.13
6 of 12
Product Name
Version
Date
Page
Software
operating
Connect the board to PC with a serial port cable.
- Build the example project and download the binary file to the MT7687.
- Reboot the HDK, the console will show "FreeRTOS Running" message to
indicate the HDK is booting up.
- Use '?' and enter to query the available command line options.
Note that the command line options are still under development and subject to
change without notice.
- Below are two examples to demonstrate the Wi-Fi station and Wi-Fi access
point modes of MT7687.
- Example 1. Wi-Fi station mode.
- Find your Wi-Fi access point settings:
Before connecting to a Wi-Fi access point, the following information
needs to be collected:
1. What is the SSID of your Wi-Fi access point?
2. What is the authentication mode of your Wi-Fi access point?
In general, it is WPA PSK or WPA2 PSK. If you want to use different
settings, please read the table 'Table 1. Supported AuthMode(s)' at
the bottom of this example.
