ACS Ventus, Инструкция по эксплуатации

Страница: 3 / 10

2
:
AMBIENT&SPRESSO
when powered and equipped with efficient earthing.- In case of incompatibility between the plug and
the appliance, replace the socket with another suitable type by a qualified person.
- Place the appliance on a stable work surface.
C
LEANING
- Disconnect the power cord when you clean.
- Before unplugging make sure the power button is turned off, or not illuminated.
- Do not expose the device to heavy jets of water or diving partial or total.
- Let the appliance cool before cleaning.
- Clean the body and accessories with a damp cloth and then dry it by a non-abrasive product.
Detergents are not recommended.
M
ALFUNCTION OF THE MACHINE
- Do not use an appliance if the power cord or plug is damaged or if the unit shows signs of
malfunctioning or if it has been some damage. Return the appliance to the nearest authorized dealer
for checks or repairs.
If the power cord is damaged it must be replaced by the manufacturer or an authorized service center.
- In case of failure or malfunctioning, turn it off and do not tamper with it. For any repairs, contact a
Service Centre authorized by the manufacturer and request the use of original spare parts. The non-
respect of the content may compromise the safety of the device and void the warranty.
I
MPROPER USE OF THE MACHINE
- This device must be used only for professional and/or domestic use. Any other use is considered
improper and therefore dangerous.
- The manufacturer cannot be held responsible for any accidents caused by lack of or non-compliance
with the laws of the plant grounding.
- The manufacturer cannot be held responsible for any damage caused by improper, incorrect or
unreasonable use.
I
NSTALLATION AND
S
WITCHING THE APPLIANCE
Before connecting the machine to the power supply, carefully read the safety instructions in the
previous chapter.
Make sure that the machine is disconnected from the main power.
Connect the machine electrically.
We recommend keeping always the original packaging to send the machine to the service center for
repair
W
ARNING
When the machine is in operation, the contact with the coffee group, the steam, water tap and the
metal part of the filter holder can cause burns.
T
URN ON AND OFF
To turn on the machine, press the green button underneath the central control panel of the machine
(see pictures in last page). The green light indicates that the machine is powered. The red light is on
when element is heating and vice versa.
Turning off the red light next to the manometers also indicates that the machine
’s boiler has reached
its set operating temperature and pressure.
The manometer shows the boiler’s pressure level.
The machine is equipped by an
electronic water level probe, which will provide to keep the boiler’s
water level constant while operating.