ACS A1560 SONIC Series Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 20

ACS A1560 SONIC Series Скачать руководство пользователя страница 8

A1560 SONIC - OEM ULTRASONIC PULSER/RECEIVER FRONT-END UNIT

Advanced configuration

8

ACOUSTIC

CONTROL

SYSTEMS

3

3.2 UPLOADING A NEW FIRMWARE FILE TO THE A1560

Only firmware update files obtained from ACS should be uploaded to the A1560.

To upload the firmware update file obtained from ACS to the A1560:
1. Connect the

USB

connector located on the rear panel of the A1560 (Fig.2 Pos.8) to a PC with a standard USB 2.0 A-B cable.

2. Start the A1560 in DFU mode. The state indicator should start blinking slowly and a new USB drive should be detected by the

PC’s operating system.

3. Copy the device firmware update file to the USB drive that appeared when the A1560 was switched to DFU mode. The state

indicator should start blinking rapidly, indicating that the firmware update is in progress.

4. Wait about a minute until the state indicator switches to slow blinking again, indicating that the firmware update is finished.
5. Reboot the A1560 in normal mode.

«
...
6
7
8
9
10
...
»

Содержание A1560 SONIC Series





















Отзывы:

Нет отзывов