ACS contsys RCE 300, Руководство пользователя

Страница: 128 / 152

ACS-CONTROL-SYSTEM GmbH l Lauterbachstr. 57 l D-84307 Eggenfelden l www.acs-controlsystem.de l info@acs-controlsystem.de
128
Anhang Universal Data Manager
128
Description Reset analysis of a single channel.
Note: should only be executed after the device has taken over the setup.
Options Please select, Universal input x, Digital input x, Maths x, Set point x, Relay x
Factory setting Please select
Submenu "Limits - Set point x"
Navigation Expert → Application → Limits → Set point x
Description Limit values can monitor the measured values. A relay, for example, can be switched if a
limit value is violated. View or change the set-up for the selected alarm set point.
x = place holder for selected limit value
Channel/value
Navigation Expert → Application → Limits → Set point x → Channel/value
Direct access code: 450000-0xx
Examples: Set point 1: 450000-000; Set point 30: 450000-029
Description Select which input/calculated value the limit value refers to.
Options Switched off, Universal input x, Digital input x, Maths x
Factory setting Switched off
Type
Navigation Expert → Application → Limits → Set point x → Type
Direct access code: 450001-0xx
Examples: Set point 1: 450001-000; Set point 30: 450001-029
Description Type of limit value (depends on the input variable).
Options Switched off, Upper set point, Lower set point, Analysis x
Factory setting Switched off
Identifier