Acrosser Technology AR-V6002FL, Руководство пользователя

Страница: 75 / 84

Revision: 1.23
75
6. Syntax:
i32 setPowerOnMode( u8 powerOnMode )
Description: The function sets up the source of the boot-up signal of the system. There are two
choices: boot from the Ignition or boot from the Remote Switch.
Parameters:
PowerOnMode = 0xa5, boot up by the Ignition.
PowerOnMode = 0x5a, boot up by the Remote Switch.
There are macros of Ignition mode and Remote Switch mode in pwr_acce.h (Linux) and
AR-B6002.h(Windows).
Return Value: If the function sets power-on mode successfully, it will return 0. If any error, the
function returns –1.
7. Syntax:
i32 getSoftOffDelay( u32 *Time )
Description: The Soft Off Delay is the interval between that the system receives a power off
signal and that the system generates a power off signal. This function gets the interval.
Parameters: The parameter is a pointer which points to an unsigned long variable. The
returned value is stored at this variable. The unit of the returned value is in seconds.
Return Value: If the delay time is returned successfully, the function returns 0. If any error, it
returns –1.
8. Syntax:
i32 getHardOffDelay( u32 *Time )
Description: The Hard Off Delay is the interval between that the system is off and that the
power 5VSB is off. This function gets the interval.
Parameters: The parameter is a pointer which points to an unsigned long variable. The
returned value is stored at this variable. The unit of the returned value is in seconds.
Return Value: If the delay time is returned successfully, the function returns 0. If any error, it
returns –1.