manualshive.com logo in svg

Acrosser Technology AR-B6005, Руководство пользователя

Поделиться
Скачать
Acrosser Technology AR-B6005 Скачать руководство пользователя страница 65

6.5.4 I-Button 

1.

 

Syntax:

 

  

i32 resetIbutt(void) 

 

Description:

 This function resets the I-Button. 

 

Parameters: 

None. 

 

Return Value:

 If this function works successfully, the function returns 0, any other value stands for 

error. 

 

2.

 

Syntax: 

   

i32 readIbutt(u8 *data) 

 

Description:

 This function reads data from the I-Button. 

 

Parameters: This function takes a pointer to an unsigned char variable. The data to be read from the 

I-Button is put at the memory which is pointed by the parameter ‘data’. 

 

Return Value:

 If this function works successfully, the function returns 0, any other value stands for 

error. 

 

3.

 

Syntax: 

   

i32 writeIbutt(u8 data) 

 

Description:

 This function writes command to the I-Button. 

 

Parameters: 

This function takes an unsigned char variable as the parameter. The command to be 

written to the I-Button is the value of the parameter ‘data’. 

 

Return Value: 

If this function works successfully, the function returns 0, any other value stands for 

error.

 

 

 

 

 

 

 

65

Содержание AR-B6005



































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды