AND-DNV3N1 Series
30
Acrosser Technology Co., Ltd.
• Terminal Type
Use this item to select the preferred terminal emulation type for out-of-band
management.
•
Bits per second
Use this item to select the serial port transmission speed. The speed used in the
hostcomputer and the client computer must be the same. Long or noisy lines may
require lowertransmission speed. he options include [9600], [19200], [57600] and
[115200].
•
Data Bits
Use this item to set the data transmission size. he options include [7] and [8] (Bits).
• Parity
Use this item to select the parity bit. he options include [None], [Even], [Odd], [Mark]
and [Space].
•
Stop Bits
The item indicates the end of a serial data packet. he standard setting is [1] Stop Bit.
Select [2] Stop Bits for slower devices.
• Flow Control
Use this item to set the f low control to prevent data loss from buffer overf low.
Whensending data, if the receiving bufers are full, a “stop” signal can be sent to stop
the datalow. Once the bufers are empty, a “start” signal can be sent to restart the
low. Hardwarelow uses two wires to send start/stop signals. he options include [None]
and [HardwareRTS/CTS].
•
VT-UTF8 Combo Key Sup
Use this item to enable or disable the VT-UTF8 Combo Key Support for ANSI/VT100
terminals.
• Recorder Mode
Use this item to enable or disable Recorder Mode to capture terminal data and send
it astext messages.
•
Resolution 100x31
Use this item to enable or disable extended terminal resolution support.
•
Putty KeyPad
Use this item to select Function Key and Keypad on Putty.
