3 - ATRx Secure PunchIn
™
Installation Guide
The computer should display a message indicating that the new
hardware was found.
When the ‘Found New Hardware Wizard’ is displayed:
1. If the Wizard asks “Can Windows connect to Windows Update
to search for Software?”, select “No, not this time”.
2. Verify that the Attendance Rx CD is still in the CD-ROM drive.
If NOT, then load it, and when the InstallShield Wizard starts to
run select “Cancel”.
3. Respond to the Wizard questions by accepting the default answers
to the questions.
4. The Wizard will display a message when the hardware installation
is complete.
If the New Hardware Wizard is NOT displayed or fails to complete,
go to Troubleshooting - Manually Installing the Fingerprint Unit (FIU).
1. To confirm the software is running, a System Tray
Icon will appear in the bottom right-hand corner
of your PC desktop screen.
2. To enable the ATRx Secure PunchIn
fingerprint reader biometrics (FIU)
in the software, right click the System
Tray Icon and select System Utilities.
3. If prompted to log in as the
Administrator, please do so in
order to complete this step.
4. When the screen appears, select
the Biometrics tab.
Enable Biometrics in the Software
ATRx Secure PunchIn
™
Installation Guide - 4
5. Place the mouse in the check
box to the left of Enable
Attendance Rx Biometrics
Functionality and left click one
time to enable.
6. Click the Autodetect device button.
7. Verify that the FIU device shows
in the Installed Biometric Device field.
8. Press the Close button.
Enable Biometrics in the Software
