V108
Operation Manual, Xymba XB-42
© 2008, Acronova Technology, Inc.
17
O
PERATION
Q
UICK
G
UIDE
Abort a Running Operation
To abort a duplication session, press and hold the
Test/Abort button for two seconds. If the recorder
is currently writing to disc, Xymba is designed to
abort the duplication session after the recorder has
completed writing to disc.
Important:
Turning the power switch to the Off position will immediately
terminate the active duplication session, damaging any disc in the
process of being written to. Only turn off the power in case of
emergency.
Start a Duplication Session
High-Speed Duplication produces more discs per hour, yet Safe-Speed
better assures duplicate disc quality especially for audio and video
discs.
Follow the steps below to start a one-to-multiple disc duplication
session:
1) Load the master disc into the
disc loader.
2) Load the desired quantity of
blank discs on top of the master
into the disc loader.
3) Press either the High or
Safe-Speed Duplication button
to start. Xymba will run the
operation until the disc loader is
empty.
Important:
In duplication mode whenever a rewritable
disc is detected, Xymba is designed to
always erase the disc. Do not use
rewritable discs as master discs because the
data on the disc will be erased.
