Version 9E1
User’s Manual, Nimbie Chorus NBCH07
4)
Use the NimbieCable that comes with each Client unit to connect it to the
Master unit.
Note:
The notch at the male connector on NimbieCable shall be
aligned with the counterpart of the connectors on the Master unit
and the Client unit.
5)
Use the power cord that comes with the Master unit to connect it to a wall
outlet with a reliable power supply.
You have now completed the Nimbie Chorus System hardware installation.
Turning Power On and the Initialization
Before turning the power on, make sure the voltage setting on the rear panel
of the Master unit is properly set. Now, toggle the power switch on the rear of
the Master unit to turn the power on.
During the initialization process, the LCD screen on the Master unit will
display a sequence of messages. In the mean time, each of the Client
unit will individually go through its initialization process and you will hear
the drive tray in the Client unit move out and in.
Note:
The initialization shall take a minute. Please be patient until the
process has fully completed.
When the initialization has completed, you will see:
1)
All the Client units shall have its Ready indicator steadily light up.
Note:
Refer to the user’s manual that comes with the Client unit for the
meaning of its LED indicators.
2)
On the Master unit, to the lower-right of the control buttons, the Ready
indicator shall light up steadily.
3)
On the Master unit, the LINK indicator individually corresponding to a
successfully connected Client unit shall light up steadily.
4)
Finally, on the Master unit the LCD shall display “HDD COPY”. Now, the
Nimbie Chorus system is ready to work.
Note:
During and before the end of client unit initialization process, all
control panel keys will be inactive.
Turning the System Off
Before turning off, it is recommended to make sure the Nimbie Chorus system
is idle. In case there is an operation or a session going underway, wait until it
has completed. Then, turn the power switch on the Master unit to the off
position.
@ 2010, Acronova Technology, Inc.
13
