Model DT33x-0700
4-Wire DC I/V Dual Transmitter w/USB
Acromag, Inc. Tel: 248-295-0880
- 17 -
http://www.acromag.com
- 17 -
https://www.acromag.com
Quick Overview
–
Windows...
HELP
–
You can press F1 for Help on a selected or highlighted
field or control. You can also click the [?] button in the upper-
right hand corner of the screen and then click again to point
to a field or control to get a Help message pertaining to the
item you pointed to.
Diagnostics (Optional, to Verify Unit Operation)
After making Configuration changes, you may use the
Diagnostics - TEST I/O controls to start/stop polling the
input channel(s) to check your input readings (see screen
at left).
•
Use this screen to verify communication with the
unit or problems with your input wiring.
•
Click
[Start Polling]
to periodically read your input
channels and validate operation. Click
[Stop
Polling]
to stop polling the input channels. The
simulated red lamp to the left of the button flashes
slowly when the software polls the input channels.
Stop polling before selecting another page or
sending a new reconfiguration.
The communication status of the polling messages is
also indicated and can be helpful to troubleshoot
connection problems.
Communication Status (Bottom of Screen)
•
Displays communication status messages for the
calibration process.
The COMMUNICATION STATUS message bar at the
bottom of the screen will display status messages
relative to calibration.
