Acromag AVME9675A Series Скачать руководство пользователя страница 53 | Manualshive

Страница: 53 / 61

background image

INDUSTRIAL I/O PACK SERIES AVME9675A

VME64x bus 6U CARRIER BOARD

Acromag, Inc. Tel: 248-295-0310

- 52 - http://www.acromag.com

- 52 -

https://www.acromag.com

Mounting

Termination panel is snapped on the DIN mounting rail.

Printed Circuit Board

Military grade FR-4 epoxy glass circuit board, 0.063 inches thick.

Operating Temperature

-40



C to +100



C.

Storage Temperature

-40



C to +100



C.

Shipping Weight

1.25 pounds (0.6kg) packed.

VME64x TRANSITION MODULE: MODEL TRANS-200

Type

Transition module for AVME9670, AVME9675A-4, and AVME9675A-2
boards.

Application

To repeat field I/O signals of IP modules A through D for rear exit from
VME64x card cages. This module is available for use in card cages which
provide rear exit for I/O connections via 80 mm wide transition modules
(transition modules can only be used in card cages specifically designed for
them). It is a double-height (6U), single-slot module with front panel
hardware adhering to the VME64x bus mechanical dimensions and IEEE
Standard (1101.11-1998), for 80 mm depth. Connects to Acromag
termination panel 5025-552 from the rear of the card cage, and to
AVME9670 & AVME9675A boards within card cage, via connectors RP0 and
RP2.

Schematic and Physical
Attributes

See Drawing 4501-760.

Field Wiring

Four SCSI-2, 50-pin female connectors (AMP 787082-5 or equivalent)
employing latch blocks and 30 micron gold in the mating area (per MIL-G-
45204, Type II, Grade C). Connects to Acromag termination panel 5025-552
from the rear of the card cage via round shielded cable (Model 5028-187).

Connections to AVME9675A

Connections are made though the PC board connectors RP0 (95 pin female
with upper ground shield) and RP2 (160 pin female). The transition module
plugs directly behind the AVME9670A or AVME9675A board into the
VME64x bus backplane within the card cage system.

Mounting

Transition module is inserted into a 6U-size, 80 mm width slot at the rear of
the VME64Xbus card cage. (Directly behind AVME9670 or AVME9675A
board).

Printed Circuit Board

Six-layer, military-grade FR-4 epoxy glass circuit board, 0.063 inches thick

Operating Temperature

-40



C to +85



C.

Storage Temperature

-55



C to +105



C.

Shipping Weight

1.25 pounds (0.6kg) packed.

«
...
51
52
53
54
55
...
»

Содержание AVME9675A Series






























































Отзывы:

Нет отзывов

Похожие инструкции для AVME9675A Series

Бренд: Storchenwiege Страницы: 24

Бренд: KIDDY Страницы: 112

Бренд: Burley Страницы: 24

Бренд: ARKSEN Страницы: 6

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды