ACEX4041 COM Express Type 10
AcroPack Carrier Board
- 40 -
M.2 MODULE INSTALLATION
1.)
Power should be removed from the carrier board when installing
AcroPack modules, cables, termination panels, and field wiring. To install,
remove the Shoulder screw and the nylon washer from the carrier.
2.)
Insert the edge of the AcroPack module into the carrier connector at an
angle like that shown below. Also place the washer in the size location for
your M.2 module.
3.)
Position the module such that the mounting hole on the M.2 module
aligns with the washer hole. The module sits onto of the washer.
4.)
Secure the M.2 module in place with the shoulder screw.
Shoulder screw
Nylon Washer
