Acromag ACC1000 Скачать руководство пользователя страница 2

Serial Communication Converters & Adapters 

Instruction Manual 

2

Disclaimer 

The information contained in this document is 
subject to change without notice. Acromag 
makes no representations or warranties with 
respect to the contents hereof, and specifically 
disclaims any implied warranties of 
merchantability or fitness for a particular purpose. 
See Warranty Information and Terms & 
Conditions on 

www.acromag.com

 for complete 

details. 

Read complete instructions prior to installation
and operation of the meter.

Risk of electric shock or personal injury.

These products are not recommended for life
support applications or applications where
malfunctioning could result in personal injury or
property loss. Anyone using these products for
such applications does so at his/her own risk.
Acromag Inc. shall not be held liable for damages
resulting from such improper use.

 

WARNING 

Cancer and Reproductive Harm 

www.P65Warnings.ca.gov

 

Limited Warranty 

Acromag Inc. warrants these products against 
defects in material or workmanship for the specified 
period under 

“Specifications” from the date of 

shipment from the factory. Acromag

’s liability under 

this limited warranty shall not exceed the purchase 
value, repair, or replacement of the defective unit. 
See Warranty Information and Terms & Conditions 
on 

www.acromag.com

 for complete details. 

Registered Trademarks 

All trademarks mentioned in this document are the 
property of their respective owners. 

© 2020 Acromag Inc. 
All rights reserved. 

Introduction 

Acromag provides an assortment of serial 
communications adapters and converters to enhance 
the utility of its products. These external devices 
connect to the RJ11 header at the back of the 
instrument and allow the meter to communicate over 
RS-232, RS-485 or USB. One of the most useful of 
these devices is the ACC1000 USB adapter which 
allows the APM765/VPM3000 to connect to a PC 
running free DisplayWizard programming software via 
the USB port as pictured below: 

Ordering Information 

Model 

Description 

APMA7232 

APM765 and VPM3000  
RS-232 Adapter, APMA7420 included 

APMA7420 

APM765 and VPM3000  
Meter Copy Cable 7' (2.1 m) 

APMA7422 

APM765 and VPM3000 
RS-485 Adapter, APMA7420 included 

ACC1001 

RS-232 to RS-485 Isolated Converter 

ACC1000 

APM765 and VPM3000 
USB Adapter for programming only 

ACC1002 

USB to RS-232 Non-Isolated Converter 

ACC1003 

USB to RS-485 Isolated Converter 

DisplayWizard 

DisplayWizard Software for APM765 
and VPM3000. FREE download 
available at 

www.acromag.com

  

Содержание ACC1000


















Отзывы: