
APZU Cable Breakout
USER
’S MANUAL
Acromag, Inc. Tel: 248-295-0310
- 6 -
http://www.acromag.com
- 6 -
https://www.acromag.com
Figure 1
5028-626 Breakout Panel
Figure 2 Male to Male 1-foot
cable
Signal Descriptions:
The I/O signals of the APZU-303 include 20 TTL, three RS485 signal pairs,
UART to USB port, USB 2.0, Ethernet via RJ-45, push button reset, and
power-on push button.
Model APZU-303
20 TTL Signals (P1, P2, P3)
(See Xilinx UG571 UltraScale
Architecture SelectIO
Resources)
Signals B26_TTL0 to B26_TTL19
All I/O signals originate from bank 26 of the Zynq chip. Back 26 is powered
by 3.3 volts. The signals from Bank 26 are High Density (HD) I/O Resources.
HD I/O is designed to support speeds up to 250Mbps interfaces. Bank 26 I/O
signals will support LVTTL and LVCMOS. These signals can be used as input,
output, or bidirectional.