Acrel AM5SE Series, Руководство по эксплуатации

Страница: 21 / 32

19
and down key to set the modified content, as shown in figure 3.14.After the set is completed, press the
“Enter” button, then set the next one as the same way.
When the all setting is completed, press “Esc” button to exit, at this time if the data changes, the device
will pop up with the data dialog box shown in figure 3.9, press “enter” button to save the changes and return
to value management menu, click “Esc” button is not saved and to return to value management menu.
运行定值区只显示装置当前运行的定值区号，这里不做修改。
The running value area only displays the current running value area of the device. and no modification
is made here.
定值修改
000 8
acrel
定值切换
切至定值区:0 1
运行定值区:01
定值修改[00] (001)
CT变比
0300.00
0100.00
3PT
KV
0100.00KW
PT变比
电压接线方式
一次电压显示
电动机额定功率一次值
图 3.13 输入密码对话框 图 3.14 定值修改 图 3.15 定值切换
Modify
000 8
acrel
Group
Selected:0 1
Runing:01
Modify[00] (001)
CT
0300.00
0100.00
3PT
KV
0100.00KW
PT
PT Mode
U Unit
Tel
Figure 3.13 Enter password Figure 3.14 Modify Figure 3.15 Group
3.3.3 定值切换
3.3.3 Group
“定值切换”菜单有切至定值区、运行定值区两个子菜单，该菜单密码为“0008”。
切至定值区内有 00-03 四个有效定值区可供切换，设置好后，按“确认”键确定，再按“返
回”键返回主菜单。运行定值区将显示当前运行的定值区号，如图 3.15。
The “Group” menu has two submenus, which are cut to the value area and run the value area. The
password of this menu is “0008”. The selected section shows the expected section which uses want to set,
which can be set as 00-03. The running section shows the nowadays value of the device AM4. The details
are shown in figure 3.15.