DIMENSIONS
HOW TO USE
This unit features 3 buttons to display the measured electrical
parameters. By pressing each button, the user will cycle
through the parameters and settings.
Voltage & Current
Power
Energy
Voltage & Current
Pressing the
button displays the following parameters:
Voltage (V)
Current (A)
Frequency (Hz)
Modbus Address
Baud Rate
Parity Setting
High word for 645 Protocol (N/A)
Low word for 645 Protocol (N/A)
Firmware Version
Cr (software verification code)
Full Display Test
Power
Pressing the
button displays the following parameters:
Active Power (kW)
Reactive Power (kVar)
Apparent Power (kVa)
Power Factor
Energy
Pressing the
button displays the following parameters:
Total (im exported) Active Energy (kWh)
Imported Active Energy (kWh)
Exported Active Energy (kWh)
Total Reactive Energy (kVArh)
Imported Reactive Energy (kVArh)
Exported Reactive Energy (kVArh)
MODBUS PROTOCOL
For the full Modbus Protocol please visit:
http://downloads.spwales.com/spdac200-protocol.pdf
Or use the following QR code: