background image

Y1-03-0240A 

19

 

APPENDIX C - WARRANTY, USEFUL LIFE POLICY, NOTICES 

1. 

Limited Warranty 

This product is warranted against factory defects in material and workmanship for 
a  period  of  1  (one)  year*  from  date  of  purchase  or  receipt  as  a  gift.  During  the 
warranty period ACR Electronics, Inc. will repair or, at its option, replace the unit

 

at  no  cost  to  you  for  labor,  materials  and  return  transportation  from  ACR.  For 
further  assistance,  please  contact  our  Technical  Service  Department  at  ACR 
Electronics,  Inc.,  5757  Ravenswood  Road,  Fort  Lauderdale,  FL  33312-6645. 
Email:  [email protected],  Fax:  +1  (954)  983-5087,  Telephone:  +1 
(954) 981-3333. 

 

This  warranty  does  not  apply  if  the  product  has  been  damaged  by  accident  or 
misuse,  or  as  a  result  of  service  or  modification  performed  by  an  unauthorized 
factory.  Except  as  otherwise  expressly  stated  in  the  previous  paragraph,  THE 
COMPANY  MAKES  NO  REPRESENTATION  OR  WARRANTY  OF  ANY  KIND, 
EXPRESS  OR  IMPLIED,  AS  TO  MERCHANTABILITY,  FITNESS  FOR  A 
PARTICULAR PURPOSE, OR ANY OTHER MATTER WITH RESPECT TO THIS 
PRODUCT.  The  Company  shall  not  be  liable  for  consequential  or  special 
damages. 

 

To  place  the  warranty  in  effect,  register  online  at 

www.acrelectronics.com

  or 

return the attached card within 10 days. 

 

*Five years for the following products: EPIRB, PLB, S-VDR, SSAS. 

 

2. 

Useful Life Policy 

The  typical  service  life  of  a  properly  maintained  Product  is  limited  to  12  years 
from date of manufacture. Products that are 12 years and 1 month or older from 
date  of  manufacture  will  not  be  serviced  by  ACR  or  our  Battery  Replacement 
Centers. A Product that is 12 or less years old from date of manufacture will be 
serviced as long as the unit appears fit to be placed back into its final operational 
cycle. Service includes the replacement of those items that must be replaced at 
service  intervals  and  the  verification  that  the  device  appears  to  be  in  good 
mechanical  and  electrical  working  condition  by  an  ACR  authorized  service 
technician. 

 

3. 

Notices 

ACR  Electronics  diligently  works  to  provide  a  high  quality  Product  Support 
Manual,  however,  despite  best  efforts,  information  is  subject  to  change  without 
notice, and omissions and inaccuracies are possible. ACR cannot accept liability 
for  manual  contents.  To  ensure  that  you  have  the  most  recent  version  of  the 
Product 

Support 

Manual, 

please 

visit 

the 

ACR 

website 

at 

www.acrelectronics.com

 

©2008  by  ACR  Electronics,  Inc.,  part  of  Cobham  plc.  All  rights  reserved. 
Reproduction  in  whole  or  in  part  is  permitted  only  with  permission  of  ACR 
Electronics, Inc.  

 

Ongoing  product  improvements  may  change  product  specifications  without 
notice. 

 

Trademarks or registered trademarks are the property of their respective owners.

 

Содержание ResQMate RLB-40





















Отзывы:

Похожие инструкции для ResQMate RLB-40