ACR Electronics PLB-410 Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 32

ACR Electronics PLB-410 Скачать руководство пользователя страница 11

Y1-03-0362 Rev. A

Company Confidential

11

Activating Your Beacon

Overview

Personal Locator Beacons are designed to be manually activated. They are only to be activated
when all other means of self-rescue have been exhausted. When properly registered as
required, the activation of the beacon tells Search and Rescue who you are, where you are, and
that you are facing a life-threatening situation. Note: Beacon should be activated in open space
with clear view of the sky (eg. Not under any sort of cover or canopy)

How to Activate Your Beacon

To activate your beacon in a distress situation, follow these steps:

1.

Unclip the antenna latch from the case and rotate antenna 90
degrees into the upright position. (ON/OFF button will be exposed on
face of beacon once antenna is in upright position)

2.

Depress the ON/OFF button for 2 seconds.

When activated:

The strobe light will flash twice and the

red

LED will

flash once to let you know the beacon has been
activated. The strobe light and Infrared (IR) strobe light
will both then continue to flash once approximately
every 10 seconds for the entire time the beacon is
activated (Note: The IR strobe is not visible to the
naked eye). The

red

LED will flash approximately once

every 5 seconds prior to the beacon acquiring your GPS
coordinates.

Once the beacon acquires your GPS coordinates, the
flashing

red

light will be replaced by a flashing

green

light which will flash approximately once every 5
seconds. The flashing

green

light indicates the beacon

is transmitting your GPS coordinates along with your
406 MHz distress signal.

Fifty seconds after activation, a single

blue

light will flash

between flashes of the

red

or

green

light, indicating that the

RLS (Return Link Service) emergency message has been sent
to SAR (Search and Rescue) authorities. Once the single

blue

flash changes to a double

blue

flash, this confirms that your

emergency RLS message has been received by SAR authorities.

«
...
9
10
11
12
13
...
»

Содержание PLB-410

































Отзывы:

Нет отзывов