3.5.4 Ship Settings (User Password Protected)
After a new User Password has been set, the Ship Settings may be input. The Ship Settings are
usually only set once, upon NAUTICAST™ initial operation.
A selection is made with the cursor buttons [Up]
or [Down] for input field selection. The category
“ShipType” is equipped with default settings, which can be selected by pressing the [Left] or [Right]
buttons.
NOTE: The default password from the factory is mentioned on your AIS display at the
protection foil. (see Appendix 7.2 for password information).
Before entering Ship Settings for initial NAUTICAST™ operation, it is advised to configure the
User Password in:
Menu 5:
Configuration
Submenu 1: Change User Password
After the User Password has been set, Ship Settings may be input.
Dynamic Keys: Input of Ship Settings
[M5] [Save]
Confirm Data Input
[M8] [Back]
Return to Main
Menu
N48^12' E 16^26' |1> N/A|2> N/A|3> N/Anm
************ Ship Settings *************
Call Sign:SO52 /\ +
ShipName :SOLAS 52 / \|
Ref.Points ext int | |
A: 170m 171m | A
B: 30m 29m | |
C: 15m N/A | +--|
D: 15m 30m | | B
Len (A+B): 200m 200m | | |
Beam(C+D): 30m 30m +-C-+D-+
Ship Type: N/A or no ship
>>> DATA OK. PRESS M5 TO SAVE DATA <<<
----------------------------------------
NUM| Save | |
| Back
| Save | | | Back
Y1-03-0203 Rev. M
43
