Page 7
Special Functions
Refrigerant Leakage Detection
When refrigerant leakage is detected, the indoor
unit will display “EC” code or flash LEDs
(depending on model).
Louver Angle Memory Function
The minimum and maximum angle of the
horizontal louver is fixed. The unit has a memory
function and will return to the last position
selected. Never adjust the horizontal louver
angle manually. The louver angle memory
function does not apply when TURBO function
or manual control is selected.
Additionally, it is strongly suggested that the
opening of the horizontal louver not be set too
small in case condensation forms and drops
from the horizontal louver.
Auto-restart Function
In the event of a power interruption such as a
blackout, once power is restored, the unit will
restart automatically with all the previous
settings preserved by the memory function.
Self Clean Function
• Airborne bacteria uses the moisture on the
indoor heat exchanger to grow. Regular drying
of the exchanger prevents this growth. By simply
pressing the SELF CLEAN button, the system
will automatically manage the process. This
cleaning action may be done as frequently as
desired.
• For cooling models, only the indoor fan is active
in low speed for 30 minutes and the unit turns off
automatically once self clean session is
complete.
• For cooling and heating models, the unit will
operate in the following sequence:
Fan mode at Low fan speed
Heating
operation with Low fan speed
Fan operation
Stop operation
Turn Off.
NOTE:
• This function can only be activated in COOLING
or DRY mode.
• It is recommended that the air conditioner be run
in the cooling operation for approximately 30
minutes before activating SELF CLEAN function.
• Pressing the SELF CLEAN or ON/OFF button
again during the cleaning cycle will cancel the
operation and turn the unit off.
Mute Operation
Pressing the LED button on the remote control
can turn off the indoor screen display and also
turn of the Air Conditioner buzzer to create a
quieter environment.
