background image

8

Each numbered pad can be programmed for a specific food 

item, such as defrosting and then cooking vegetables or other 

frozen foods. To use this feature, program the pad to the 

desired length of time and power level. Press the pad once 

and the microwave will begin cooking. For instructions, see 

page 10 of the 

Programming Oven Controls

 section of this 

manual.

A maximum of 100 programs can be saved when this feature 

is enabled. Each entry will be assigned a double digit number, 

for example 01, 05, or 20. When double pad programming is 

enabled, two pads must be pressed to start the cooking cycle.

A standard USB flash drive is compatible with the microwave 

oven.This feature allows the user to save preprogrammed 

settings and user options to the flash drive rather than 

programming the settings directly to the numeric keypads. 

Top Only or Bottom Only cooking allows the user to use 

only the top or bottom of the microwave during a cooking 

cycle. When “Top Only” is selected, only the top magnetrons 

operate. When “Bottom Only” is selected only the bottom 

magnetrons operate. See page 10 for more information about 

this feature.

User options such as beep volume or the number of 

programmable pads can be changed and saved. To change 

different options, see page 11 of the 

Programming Oven 

Controls 

in this manual.

User Options

Display and Features

USB Compatibility

The cooking pause is a feature 

unique to this series of microwaves. 

This pause enables extra ingredients 

to be added, cooking progress to 

be checked, or for food to sit for a 

necessary time between cooking 

cycles. During a mid-cycle cooking 

pause, the microwave beeps 

continuously and PROGRAM 

PAUSED displays until the oven 

door is opened and closed. To 

continue the cycle, press the START 

button.To utilize this feature, see 

the 

Programming Oven 

Controls 

section of this 

manual.

Mid-Cycle Cooking Pause

Double Pad Programming

Single Pad Programming

Top or Bottom Only Cooking

A/B

1

0 1

What is stage cooking?

Stage cooking enables several 

different cooking cycles, or 

stages,  to be used consecutively 

without repeated input from the 

user. Stage cooking can be set 

to defrost food initially, then cook 

it, and keep the food warm until 

serving time. The total cooking 

time for all combined stages 

cannot exceed 60 minutes. 

To learn how to use the stage 

cooking function, see page 10 of 

the 

Programming Oven Controls

 

section of this manual.

Part No. 20152601 

Printed in U.S.A. 03/14

Original Instructions

   

 

2014 ACP, Inc.

Cedar Rapids, Iowa 52404

Содержание MSO Series















Отзывы: