7
TIME ENTRY
pad is used to enter cooking
time for either manual entry or programming.
Cooking time ranges from 1 second (00:01)
to a total of 60 minutes (60:00) over four stages. If
more than 60 minutes of total microwave cooking
time is required, open door and inspect food before
beginning new cooking cycle.
Numbered pads
begin cooking
programs or enter times and
power levels for “Manual Time
Entry” cooking.
POWER LEVEL
pad is used to set
microwave power level. When cooking, the
power level can be decreased for foods
that require slower more even cooking.
Microwave power levels range from 0% to 100% in
10% increments. If cooking time is set and START
pad pressed, oven cooks at 100% power. When
programming, to reset power level to 100%, press
power
LEVEL pad.
START
pad begins Manual Time Entry
cooking or restarts an interrupted cooking
cycle. When programming, use to save time
and power level, and to advance to next
user option.
STOP/ RESET
pad exits programming
mode and stop cooking during cooking
cycle.
Display (some models)
Some items in display
can be seen but will not
glow.
Stages
This oven can be programmed to run 4 cooking
sequences consecutively. Each sequence is called
a stage. For example, the first cycle could be
programmed to defrost at 60% power, the second
to defrost at 30% power, the third to heat at 100%
power, and the fourth to hold warm at 10% power.
Total time for all cooking stages counts down.
User Options
User Options allow the user to program the oven
to perform in a way convenient to the user. The
beeps, maximum cooking time, and number of pre-
programmed cooking sequences can be changed.
Display and Features
NOTE:
There are two styles of controls shown Style 1 and Style 2 choose the control that
matches unit
STYLE 1
