ACP AXP20, Руководство по обслуживанию

Страница: 15 / 46

13
OVEN PERFORMANCE TEST
USING OVEN AS A MICROWAVE OVEN
This option is only available if the oven cavity temperature is less than 200
°F
.
When user option MICROWAVE ONLY is set as a default, the MICROWAVE
ONLY button appears on the PREHEAT MENU.
To run Performance Test using microwave only follow these steps:
2. Press MICROWAVE ONLY button.
3. Press manual cook.
1. Place filled (1000 ml) test bowl in oven.
6. Oven will beep, remove test bowl from oven.
PREHEAT MENU
4. Press Pad 3 twice for 33 seconds.
5. Press Start.
7. Press OFF to return to PREHEAT MENU.
See page 14 for Oven Performance Test procedure.
Note: To run Oven Performance Test the, Oven caviTy musT be aT rOOm TemPeraTure,
and the display must read micrOWave OnLy mode. see below using oven as a microwave oven.
if micrOWave OnLy is not in display you must go to user Options and activate micrOWave
OnLy option.
Changing User Options:
1. Oven must be OFF.
2. Press and hold Pad "2" for 5 seconds.
3. rotate dial to highlight: aLLOW micrOWave OnLy mode.
4. Press save.
KEYPAD