ACP AMSO Series, Руководство по обслуживанию

Страница: 26 / 32

Interlock Switch
Assembly Upper -
RIGHT
Disconnect wires to switch.
With door open measure resistance from:
Terminal to Terminal ………………………
With door closed measure resistance from:
Terminal to Terminal……………………..
Open/Infinite
Closed/Continuity
Interlock Switch
Assembly Upper -
LEFT
Disconnect wires to switch.
With door open measure resistance from:
Terminal to Terminal ………………………
With door closed measure resistance from:
Terminal to Terminal……………………..
Open/Infinite
Closed/Continuity
Interlock Switch
Lower (2)
Disconnect wires to switch.
With door open measure resistance
Terminal to Terminal……………………..
With door closed measure resistance
Terminal to Terminal……………………..
Open/Infinite..
Closed/Continuity
Encoder Board
NOTE: KNOB DOES NOT PULL OFF
FROM FRONT. ENCODER HAS TO BE
REMOVED TO ACCESS TAB ON KNOB
Terminals 1
– 2…………………………….
Terminals 1
– 4…………………………….
Closed/Continuity w/ Knob pushed in
Opens/Closes as Knob is Rotated
Magnetron Relay
Board (4)
CAUTION !
– LIVE TEST. USE HANDS
FREE TESTS. WHILE IN COOK MODE:
J1
– 1 to J1-2 ………………………..
J2-1 or 2 to J2
– 6 or 7……………..
Test for output voltage:
J3
– 3 to either J3-2 or J3-1 ………..
Incoming Line Voltage (208 or 230)
Incoming 24vdc
Line Voltage (208 or 230)
Power Supply Board
CAUTION !
– LIVE TEST. USE HANDS
FREE TESTS:
J3 -1 or 2 to J3
– 6 or 7 ………….
J4-1 to J4 -
2……..........................
Test for output voltage:
J4-
4 ……………………………….
or
J4-
5 ………………………………..
Note:
LED Lamps J1 and J2………….
24vdc
Incoming Line Voltage (208 or 230)
230vac (if Line Voltage is 230)
208 (if Line Voltage is 208)
24vdc 100ma
23
16400029
Revision 1
December 2015