Acowa GEKKO, Руководство пользователя

Страница: 22 / 26

User manual
21
ACOWA INSTRUMENTS, Industrivej 10, 8305 Samsø - VAT-no: 36562919 – mail: info@acowa.dk – Phone: +45 7221 7979
Show Status
Online status
To activate the Online window, click on the following symbol:
This results in the following window.
It is possible to switch the power supply for the analog inputs to on status, thereby making it possible to
power and read a momentarily value from the measuring equipment which is connected (Point 4.).
1. By pressing start, the GEKKO data logger starts up its modem, thereby making it possible to test the signal
strength, as well as see the assigned IP address (4G version only) (Point 5.)
2. The battery voltage status of both batteries can be read here.
3.
Overview of the analog and digital inputs. Here you can find the status of your inputs on the GEKKO
data logger. The analog values can be read as graph or as text.
4.
Here you find the status picture of with the GEKKO datalogger's time, date and communication status.
You will also find information about IP address (4G version only), GSM signal strength, when
communicating the actual mobile band is shown beneath GSM Signal Level, as well as the time and
date in the GEKKO is showed. GEKKO data loggers synchronize automatically with the GSM mast at 4G,
if SigFox modem is used, time and date can be set via synchronization with PC. This is done by clicking
on the box showing the time and saying yes to synchronization. Communication information is only
available when the data logger is awake and communicating.
2
5
3
1
4