/
SleepPhones
®
and RunPhones
®
Classic
(Wired Headphones)
Headband
Speakers and Cord
SLEEPPHONES
®
OR RUNPHONES
®
CLASSIC
/
/
WEARING YOUR CLASSIC HEADPHONES
Please Note
: The speakers move inside of the headband,
independently of the headband.
Holding the headband, you’ll notice the flat
speakers – one on each side – inside of the
headband.
Place the headband on your head (tag towards
the back).
Once the headband is on, adjust the speakers
so they are positioned directly over your ears.
This will ensure the best sound quality.
1
2
3
R
L
3.5 mm
WASHING INSTRUCTIONS
Open the hook and loop at the
back of the headband to reveal
the speaker components inside
the headband.
Reach in to remove the
speakers, one at a time,
from the headband.
Once the speakers are
removed, you can machine-
wash the headband.
Reinsert one speaker at a time,
and move each about four inches from
the hook and loop opening on either side
of the headband.
• Right speaker has red stitching
• Left speaker has green stitching
• Softer gray side should face towards the ear
• White side should face away from the ear
Close the hook and loop opening with the cord hanging
out so you can connect to your device.
1
2
3
4
5
• When disconnecting the cord, grasp and pull the plug
and not the cord.
• Do not leave components in a wet or dirty headband.
• Wash your headband regularly (remove all components
before washing).
• Avoid bending near the plug and keep the cord free of
tangles and knots.
PROLONG THE LIFE OF YOUR HEADPHONES
R
L
INSTRUCTIONS
Scan this QR code or visit
www.SleepPhones.com/instructions
to read this User Guide as well as Warranty Information and
Legal disclosures in additional languages.
ANLEITUNG
INSTRUCCIONES
ISTRUZIONI
INSTRUÇÕES
說明書
说明书
指示書
명령
تعليمات
