18
P2S, Azimuth and Overhang
In your UNI-Protractor set you will find a metric
stainless steel ruler with 0.5mm scale.
Use it to determine or check your mounting
distance.
Put the “zero” at the center of your spindle and
try to locate the pivot center of your tonearm.
Do measure the distance from the center of your
spindle to the pivot center.
Please note that the mounting distance of your
given tonearm is a basic cornerstone of your
tonearm’s geometry and you should meet the
requested mounting distance - or P2S - as perfect
as possible.
