21
Removing the fingerlift
The
AQUILAR
allows for the easy removal of
the fingerlift.
Please select the 0.89/90 Allen key from the
accessory box.
Undo the rear M2 grub screw at the upper left of
the headshell’s rear.
It fixes the fingerlift in place.
Undo the screw and remove the fingerlift.
You can easily restore the fitting by reversing
this routine.
This feature was incorporated for 2 reasons -
first to offer the purist the option to eliminate
another “not necessary” feature.
But also to allow for perfect close use of the
SMARTstylus
- thus paving the way for easy
and fast fine-tuning of SRA and VTA - to a level
hardly possible otherwise.
Don’t underestimate the fundamental positive
effect of this additional alignment option of the
SMARTstylus
- especially when made possible
in this close perspective! - It can enable you to
achieve the ultimate level of performance from
your analog set-up.
