260 MKII, B300H, B800H, B115 MKII, B410 MKII, B810 MKII
|
OWNER’S MANUAL
www.acousticamplification.com
6
B800H FRONT PANEL
INPUT
–10dB
PAD
MUTE
SWITCH
GAIN
CLIP
COMPRESSOR
ON/OFF
ON/OFF
OVERDRIVE
OVERDRIVE
LEVEL
VOLUME
NOTCH
ON/OFF
SHAPE
40Hz
120Hz
350Hz
800Hz
2KHz
5KHz
EQUALIZER
POWER
B800H
1. Bass Input:
¼
” two-conductor jack
2. -10 dB pad: Reduces input sensitivity for use with active electronics basses or high output pickups
3. Mute Indicator Light: Indicates B800H is muted
4. Mute Switch: Mutes sound from the B800H when switch is depressed
5. Gain: Adjusts the level of preamp input gain
6. Clipping Light: Lights in red when hi gain creates preamp clipping
7. Compression Indicator Light: Indicates the level of compression when the compressor is engaged (8)
8. Compressor On/Off: Engages compression circuitry when button is depressed
9. Overdrive: Controls the amount of overdrive
10. On/Off Switch: Activates the Overdrive circuit
11. Overdrive Level: Controls the mix of overdrive to clean signal
12. Volume: Adjusts the overall volume level of the amplifier
13. Notch On/Off Switch: Activates Notch Frequency control when depressed
14. Notch: Adjusts the -10dB notch frequency from 50Hz to 1kHz.
15. Shape: This button decreases the level of the mid frequencies creating an alternate EQ curve
16. Equalizer: These 6 knobs increase or decrease the level of the associated frequency.
17. Power Switch: When lit, the amplifier is on and ready for use.
1
5
9
11
12
17
14
2
4
8
16
10
13
15
3
7
6
9779 260MKII B300H B800H B115MKII B410MKII B810MKII Owner's Manual.indd 6
7/13/12 4:21 PM
