ACOUSTIC SOLUTIONS DX 333, Инструкция по эксплуатации

Страница: 8 / 10

1. First make sure that all connections are correctly made:
• Connect the power plug to a suitable mains socket and switch the
DX 333 system ON using the power switch (9).
2. Select the desired input:
• Select AUX (7) on the remote control unit to listen to the analogue
stereo sound source connected to the AUX inputs on the rear panel.
• Select COAXIAL (6) on the remote control unit to listen to the digital
audio source connected to the COAXIAL input connector on the rear
panel.
• Select OPTICAL (5) on the remote control unit to listen to the digital
audio source connected to the OPTICAL input connector on the rear
panel.
3. Listening mode selecting:
• Depending on the type of input selected, pressing the DSP EFFECT
button (2) allows you to select one of the Dolby Digital listening
modes: Theatre, Matrix, Live, Church, Hall, Simul (simulated)
• According to the type of digital input, pressing LISTEN MODE (3)
allows you to select the Dolby Digital decoding options of PRO
LOGIC or STEREO. The DX 333 automatically detects the type of
signal being input from a DVD player, and highlights “Dolby Digital”
if a 5.1 Dolby Digital signal is input, “PRO LOGIC” if the input signal
is Pro Logic, or “Stereo” if a stereo signal is being input.
NOTE: Many DVD discs support multi-soundtrack options, so the
digital signal input to the DX 333 will be determined by the DVD
player settings. The DX 333 stores the last settings when
switched off, and will restore these settings when next switched on.
SYSTEM FUNCTION AND OPERATION
4. Adjusting the volume levels:
• The volume of the Centre, Surround (rear) and Sub Woofer channels
can be individually set according to personal preference and room
conditions.
• Selecting TEST (4) outputs a white noise signal to facilitate setting
the volume levels the Centre, Surround and Sub Woofer channels.
• Use the +/- buttons (9) to set the sound level of each channel. Press
TEST (4) again to switch off the test tone.
5. Tone adjustment:
• The system tone can be adjusted using the BASS +/- buttons (13)
and /- buttons (14) in the range of +/- 10 dB.
6. Standby:
• If the DX 333 is not going to be used for a while, selecting
STANDBY (1) switches the system into standby (power save) mode,
indicated by the STANDBY indicator on the front panel.
Reselecting STANDBY (1) restores the system to normal operation,
with all previous settings.
NOTE: If the DX 333 is not going to be used for a period of time, it is
recommended to switch OFF the system with the power switch.
7. Mute:
• To temporarily mute the sound output of the DX 333, select MUTE
(8). The MUTE indicator on the front panel indicates the system is
muted. To restore the system to normal operation, reselect MUTE
(8).
7