ACOUSTIC SOLUTIONS DAB31-A, Инструкция по эксплуатации

Страница: 17 / 28

17
6. Use the rotary ‘Tune/Select’ control to scroll to the hour for the alarm and press the rotary
‘Tune/Select’ control to select.
7. The minutes will now flash. Use the rotary ‘Tune/Select’ control to scroll to the minutes for
the alarm and press the rotary ‘Tune/Select’ control to select. The duration time will now
flash.
8. Use the rotary ‘Tune/Select’ control to scroll to the duration for the alarm. You can choose
from 15, 30, 45, 60 and 90 minutes. Press the rotary ‘Tune/Select’ control to select. The
source for the alarm will now flash.
9. Use the rotary ‘Tune/Select’ control to scroll to the sound source for the alarm. You can
choose from Buzzer, DAB or FM. Press the rotary ‘Tune/Select’ control to select.
Note: If you select DAB or FM radio for the alarm source, ‘Last listened’ will flash in the
display. Press the rotary ‘Tune/Select’ control to select and the last listened to radio
station in DAB or FM, as appropriate, will be used for your alarm.
10. Use the rotary ‘Tune/Select’ control to scroll to the frequency for the alarm. You can
choose from Daily, Once, Weekends or Weekdays. Press the rotary ‘Tune/Select’ control
to select.
Note: If you select ‘Once’, you will then be prompted to set the date for your alarm.
11. Use the rotary ‘Tune/Select’ control to set the volume for your alarm. Press the rotary
‘Tune/Select’ control to select.
Note: Remember to set the alarm radio volume to one that will wake you. The alarm
volume will increase progressively until it reaches the alarm volume you have set.
12. ‘Alarm 1 Wizard’ is displayed again, together with ‘Alarm Off (or On)’. Use the rotary
‘Tune/Select’ control to choose ‘Alarm On’ or ‘Off’ and press the rotary ‘Tune/Select’
control to select. ‘Alarm Saved’ is displayed.
13. In Standby mode a bell symbol in the top right of the display, together with the digit ‘1’ or
‘2’ as appropriate, will confirm when an alarm has been set.
Note: If the time is not set or has failed to update from the radio signal, ‘Time is not set’
will be displayed when you try to set the alarm. The radio will then prompt you to set the
time. An alarm can only be set after the time has been set.
Stop the Alarm
When the alarm sounds, press and release the ‘Standby’ button, ‘Alarm off’ is displayed.
Alternatively, you can press and release the ‘Snooze’ button (see Snooze function below).
Snooze
When the alarm sounds you can press and release the rotary ‘Volume’ control to activate
the snooze feature. ‘Snooze 5 minutes’ will be displayed, followed by the snooze time
countdown, until the alarm sounds again.