ACOUSTIC SOLUTIONS CAMP-1B, Инструкция по эксплуатации

Страница: 11 / 14

Page 10
BALANCE CONTROL
This amplifier is fitted with a balance control which allows the volume of the
left and right signals of the stereo image to be altered in order to
compensate for an off-centre listening position.
To activate the balance control press the Balance button (6) to change the
LCD display to the balance control.
Power
Control
Headphone Treble Function Bass Balance
PHONO/TAPE
CD/DVD
DAB/MP3
Balance <Level>
<>
Balance <Level>
<>
The last setting for the balance will be displayed.
To change this balance setting turn the rotary control (2) either clockwise or
anti-clockwise to decrease the signal levels in either the right or left
speakers.
There are 32 steps around the centre position for attenuation, adjust this
control for your desired listening balance.
Note:
following this operation, the LCD display will return to indicate the
default volume setting if no operation occurs within 5 seconds. To reactivate
balance control it will be necessary to press the function button again.
USING THE AMPLIFIER
BASS CONTROL
This amplifier is fitted with a bass control which /-14dB attenua -
tion around the centre bass frequency of 100Hz, and +/-3dB across the
frequency range of 45Hz to 259Hz.
To alter this bass control press the BASS button (5), this will change the
LCD display for bass control.
The last setting for the bass will be displayed.
To change the bass setting turn the rotary control (2) either clockwise or
anti-clockwise to increase or decrease the bass content.
There are 7 steps around the centre position for +/- attenuation, adjust this
control to your desired listening level.
Power
Control
Headphone Treble Function Bass Balance
PHONO/TAPE
CD/DVD
DAB/MP3
Bass 8dB
<>OOO
Bass 8dB
<>OOO
Attention:
Please note that due to the level of boost available on this bass
control, that prolonged use of this amplifier at high levels with an increased
bass content may cause permanent damage to your speakers.
Please operate this system within the safe working limits of any ancillary
equipment that is connected to it.
Note: following this operation, the LCD display will return to indicate the
default volume setting if no operation occurs within 5 seconds. To reactivate
bass control it will be necessary to press the function button again.