Page
Diagram One
6. Controls and System Setup
The Aegis Neo Subwoofer requires connection both to mains power and an
appropriate audio signal. The connection sockets are located on the back panel
illustrated opposite in Diagram Two. Leave the subwoofer switched-off at the
mains until all connections are made and ensure that the
Volume Level
control,
also located on the back panel, is turned fully anti-clockwise. Connecting your
Aegis Neo Subwoofer to an audio signal is a simple process, however, there are
some choices to be made concerning connection mode.
Signal Input Connections
Aegis Neo Subwoofer is fitted with an unfiltered mono
AV Subwoofer Line Input
and a standard stereo pair of filtered
Line Inputs
.
The
AV Subwoofer Line Input
is intended for connection to an audio-visual
processor LFE (low frequency effects) output. As the LFE output of audio-visual
processors is already low-pass filtered, the subwoofer’s crossover filter is bypassed
by the
AV Subwoofer Line Input
. The
Crossover Frequency
control has no effect on
signals connected to the
AV Subwoofer Line Input
.
The stereo
Line Inputs
are intended for connection to preamplifier or other similar
line outputs. The left and right inputs are combined to mono within the subwoofer.
Connect to the input sockets using an appropriate RCA Phono connection cable.
Ensure that the cable is of good quality.
Signal Output Connections
RCA Phono Line Level signal output sockets are fitted to the Aegis Neo Subwoofer.
They carry an output signal identical to the input signal and may be used to
transfer the signal back to a power amplifier or to connect multiple subwoofers.
Mains Connection
After checking that the mains voltage specified on
the subwoofer rear panel is set correctly, connect
the subwoofer via its IEC mains input to a mains wall
socket. Use only the mains cable supplied with the
subwoofer.
Left
Front
Viewing/listening position
Right
Front
Centre
Left
Surround
Right
Surround
Alternative
or Extra Left
Surround
Alternative or
Extra Right
Surround
Sub-woofer
5. Connecting
VOLUME
LEVEL
CROSSOVER
FREQUENCY
PHASE
NOTCH
FREQUENCY
NOTCH
SLOPE
NOTCH
LEVEL
POWER
ATTENTION
Risque du choc electrique.
Ne pas ouveré.
CAUTION
Risk of electric shock.
Do not open.
No user serviceable parts inside.
Consult Owners Manual before use.
Operate in accordance with
Manufacturer’s instructions.
If in doubt refer to qualifi ed service personnel.
Not suitable for wall mounting.
POWER INPUT
120/240V 50/60HZ
FUSE
230-240V : T1.6AL 250V
115-120V : T3.15AL 250V
OFF
ON
AUTO
AV SUBWOOFER LINE-IN
LINE IN RIGHT
LINE OUT RIGHT
LINE IN LEFT
LINE OUT LEFT
MAINS
VOLTAGE
SELECTOR
MIN
MAX
40Hz
100Hz
55Hz
85Hz
70Hz
MIN
MAX
0dB
-12dB
-3dB
-9dB
-6dB
45Hz
150Hz
75Hz
135Hz
105Hz
0°
180°
45°
135°
90°
Designed and Engineered by
Acoustic Energey Ltd., England
Made in Malaysia
S U B W O O F E R
200 Watt Active Subwoofer
Serial Number
AE2308
Diagram Two
