Acoustic Energy AEG05/P5 Скачать руководство пользователя страница 14

Страница: 14 / 16

AEGOp5 Operation

- Pro Logic Mode

Pro Logic Mode

Your AEGO

5 will automatically switch to

Pro Logic mode when it detects a Pro Logic
signal. With other types of input signal, you
can select the Dolby Pro Logic mode
manually by pressing

Pro Logic

button on

the remote. Repeatedly pressing the
Pro Logic Button will switch the Pro Logic
mode in between the following modes;

AUTO, ALL PCM, ENABLE

and

DISABLE

If a Pro Logic signal is detected, AEGO

5 will switch to Pro Logic

mode automatically, and the display shows the following information:

If a stereo signal (either analog or digital) is detected, AEGO

5 will

switch to stereo mode automatically. You can then convert the stereo
mode to Pro Logic mode by pressing the

Prologic

button until you see

the following on the display:

If you want to convert Pro Logic or 2-channel Dolby Digital signal into
Stereo mode, you can press the

Prologic

button until you see the

following on the display:

AEGOp5 Operation - Speaker

Mode with Bass Manager

Speaker Mode with Bass Manager

The six LEDs on front panel of your AEGO

represent the six discrete audio channels
(Left, Right, Centre, Rear Left, Rear Right
and Sub). If a particular channel is active,
the LED will light up in green. The LED will
be red if that particular channel carries
bass signal below 120Hz.

Speaker Mode

Pressing the CEN button, switches the
centre channel on and off. The LCD will
display the following:

DOLBY DIGITAL CO

SPK C OFF

DOLBY DIGITAL CO

SPK C ON

DOLBY DIGITAL CO

PROLOGIC DISABLE

DOLBY DIGITAL CO

PROLOGIC ENABLE

DOLBY DIGITAL CO

PROLOGIC ALL PCM

DOLBY DIGITAL CO

PROLOGIC AUTO

Pressing the

button, switches the surround

channels on and off. The LCD will display the following:

Pressing the

button, switches the subwoofer on and off.

The LCD will display the following:

Bass Manager

Pressing the

BASS MANAGER

button enables you to select from

three different settings of Bass; Bass Config.1, Bass Config.2 and
Bass Config.3. These selections will feed the bass signal
below 120Hz to different speakers as described below.

Bass Config.1

With this setting, the bass signal below 120Hz will be sent to the
subwoofer; the LEDs on the front panel indicating SW will be red,

and the LCD will show the following:

Bass Config.2

With this setting, the bass signal below 120Hz will be sent to front left
and right speakers and the subwoofer; the LEDs on the front panel
indicating L/R/SW will be red, and the LCD will show the following
information:

Bass Config.3

With this setting, the bass signal below 120Hz will be sent to all the
speakers; the LEDs on the front panel indicating L/R/SL/SR/SW
channels will be red and the LCD will show the following information:

Bass Config. Off

With this setting, the bass signal below 120Hz will be sent to all

the speakers; the LEDs on front panel of AEGOP5 indicating

L/R/C/SL/SR/SW channels will be red and the LCD will show the
following information:.

DOLBY DIGITAL CO

BASS CONFIG.OFF

DOLBY DIGITAL CO

BASS CONFIG.3

DOLBY DIGITAL CO

BASS CONFIG.2

DOLBY DIGITAL CO

BASS CONFIG.1