manualshive.com logo in svg

Acorp VIA KT400A, Руководство пользователя

Поделиться
Скачать
Acorp VIA KT400A Скачать руководство пользователя страница 15

Chapter 2 

 

11 

trickle, the CPU clock is stopped, and the CPU core is in its minimum power state. The 
system is activated whenever the keyboard or mouse is touched. The system resumes in 
different ways as defined by Power Management Setup screen in BIOS. 

4. 

RESET

 (System Reset Switch Connector) 

This connector should be connected to the reset switch on the front panel of the system 
case. The reset switch allows you to restart the system without turning the power off. 

5. 

SPEAKER

 (Speaker Connector) 

This 4-pin connector connects to the case-mounted speaker. 

6. 

HD-LED

 (IDE Activity LED Connector) 

The IDE activity LED lights up whenever the system reads/writes to the IDE devices. 

FD1 (Floppy Connector) 

 

The motherboard provides a standard floppy disk drive connector that supports 360K, 

720K, 1.2M, 1.44M and 2.88M floppy disk types. Use this connector to connect to a 

Floppy disk drive of 34 pins . 

IDE1 / 2 (IDE Hard-Disk Connector) 

 

The motherboard has a 32-bit Enhanced PCI IDE and Ultra ATA66/100/133 controller 

that provides PIO mode 0~4, Bus Master, and Ultra ATA66/100/133 function. This 

Содержание VIA KT400A























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды