Acorp LAN110, Руководство пользователя

Страница: 8 / 58

ADSL Router
User’s Manual
( с) ACORP 2008 Revision 2.0
Page 8 of 58
3 Software Configuration
The DSL device is an ADSL2+ router. When you power on the device, the system will boot
up and connect to ADSL automatically. The system provides a PVC for bridge test by
default. The default configurations for the system are listed below.
LAN IP address: 192.168.1.1, NetMask: 255.255.255.0
VPI/VCI for ATM: 0/0.
ADSL Line mode: Auto-detect.
User can change settings via WEB browser. The following sections describe the set up
procedures.
Please set your PC’s Ethernet port as follow:
IP address: 192.168.1.XXX
NetMask: 255.255.255.0
Access the Web Console:
Start your web browser.
Type the Ethernet IP address of the modem/router on the address bar of the
browser. Default IP address is 192.168.1.1.
The Enter Network Password dialog box appears. Type the user name and
password and then click OK. (the default user name is “
Admin
” and password is
“
Admin
”)
Once you have connected to ADSL2+ router. You will see the status page.