22 / Chapter 3 Installation
1.
PS/2 AT Keyboard port
This connection is for a standard keyboard using an PS/2 plug
(mini DIN) . This connector will not allow standard at AT size
(large DIN) keyboard plugs. You may use a DIN to mini DIN
adapter on standard AT keyboards.
2.
PS/2 Mouse port
This system will direct IRQ12 to PS/2 mouse.
3.
Serial Port COM 1 and COM 2 port
The COM1 serial ports can be used for pointing devices or other
serial devices. See "Onboard Serial Port" in chipset Feature Setup
of the BIOS SOFTWARE.
The COM2 serial port header (10-1 pin ) : The optional serial
port bracket can be used to add an additional serial port for addi-
tional serial devices.
NOTE:
Serial {D-type 25pin (F) } must be connected to the
serial port.
4.
Parallel Printer port
You can enable the parallel port and choose the IRQ through "
Onboard Parallel Port" in Chipset. Feature Setup of the BIOS
SOFTWARE.
5.
Universal Serial BUS Ports 1 & 2
Two USB ports are available for connecting USB devices.
6. VGA Connectors (15-pin)
This connectors support monitor.
7.
Floppy drive connector
This connector supports the provided floppy drive ribbon cable.
After connecting the single end to the board, connect the two plus
on the other end to the floppy drives.
