Acorp 4845GVQ, Руководство пользователя

Страница: 16 / 79

1-16
Chapter 1 Motherboard 4845GVQ
Intel
ICH4
VIA
mPGA478B
Socket 478
Intel
845GV
VT610 5
IT8712F LPC IO
BIOS
VIA
VT6306
1.7.3 Floppy Disk Connector: FDD
This connector supports the provided floppy drive ribbon
cable. After connecting the single end to the board, connect
the two plugs on the other end to the floppy drives.
1.7.4 Hard Disk Connectors: IDE1/IDE2
These connectors are provided with IDE hard disk ribbon
cable into the package . After connecting the end of cable
with single connector to the mainboard, connect the other
two connectors at the other end to your hard disk. If you
install two hard disks, you must configure the second drive
to Slave mode by setting its jumper settings. BIOS now
supports SCSI device or IDE CD-ROM boot up (see "HDD
Sequence SCSI/IDE First" & "Boot Sequence" in the BIOS
Features Setup of the BIOS SOFTWARE).
1.7.5 Fan Connectors: FAN1~4
FAN 3
Connector
FAN1/2/3 Pin Definition
1 Sensor
2 +12VDC
3 Ground
1
3
2
FAN1
Connector
FAN2
Connector
FAN4 Pin Definition
1 Ground
2 +12VDC
3 Ground
1
3
2
FAN4
Connector