Acorn DC-MS325, Инструкция по эксплуатации, Страница: 6 / 15

5
INSTALLATION OF DOWNROD / HANGER WHEEL:
1) Remove the ‘R’ pin and Cross
pin from the downrod. Loosen
the
two setscrews in the
downrod support. (fig 3)
2) Install the canopy and
decorative cover through the
down rod. Thread the wires
through the downrod and insert
the downrod into the connector
(fig 3).
3) Install back the Cross pin and
secured with the ‘R’ pin. The
‘R’
pin must be properly
installed to prevent the Cross
pin from working loose (fig 4).
fig 4
fig 3